LAB501

TP-Link Archer C2 AC750 Wireless Router & Archer T4U AC1200 USB WiFi-Adapter

Specs

SpecsTP-Link Archer C2TP-Link Archer T4U
Antena2 x 2.4GHz / 5GHz 5dBi
WiFiIEEE 802.11ac/n/a - 5GHz,
IEEE 802.11b/g/n - 2.4GHz
IEEE 802.11ac/a - 5GHz,
IEEE 802.11b/g/n - 2.4GHz
Band2.4GHz si 5GHz2.4GHz si 5GHz
Connectors4 x 10/100/1000Mbps LAN
1 x 10/100/1000Mbps WAN
1 x USB 2.0
USB 3.0
Transfer speed5GHz: up to 433Mbps
2.4GHz: up to 300Mbps
5GHz 11ac: up to 867Mbps (dynamic)
11a: up to 54Mbps (dinamic)
2.4GHz 11n: pana la 300Mbps (dinamic)
11g: pana la 54Mbps (dinamic)
11b: pana la 11Mbps (dinamic)
ProtocolsDynamic IP, Static IP, PPPoE, PPTP (Dual Access), L2TP (Dual Access), BigPond, IPv4, IPv6, VPN.
ManagementAccess Control, Local Management, Remote Management.
FirewallDoS, SPI Firewall, IP Address Filter/MAC Address, Filter/Domain Filter
IP and MAC Address Binding
USB SharingSupport Samba(Storage)/FTP Server/Media Server/Printer Server
Access ControlParental Control, Local Management Control, Host List, Access
Schedule, Rule Management

From the above table we can notice the support for wireless ac/n/a standards in the 5 GHz frequency band and for the b/g/n standards in the 2.4 GHz frequency band. Also, as with any other reputable router we can find a WAN port, four LAN Gigabit ports and one USB 2.0 port which can be used to connect a printer or an external media storage.

I don’t think it’s necessary to mention the software options available through the management interface, as those are similar with the ones found on any other TP-Link router from this products range.

Hardware-wise, Archer C2 uses a MediaTek MT7620 SoC with a processor clocked at 580 MHz, and a Realtek RTL8367RD for the switch.

4 comments la: TP-Link Archer C2 AC750 Wireless Router & Archer T4U AC1200 USB WiFi-Adapter

    1. chamith wrote on:

      dear sir please help me . I bought archer c2 wireless router . but I Dont know . how to use it with my tablet I mean . I need install router to my tablet to change the password and 5 GH please help me . thanks

      Reply
    2. chamith wrote on:

      also I went tplink emulater and I run quick setup and after it appeared .’ your device not connected to wan . please help me

      Reply
      1. chamith – look in the users manual and find the ip for configuring the router (something like http://192.212.xxx.xxx). Enter that address in your browser, use the credentials “admin” “admin” and set up your router

      2. chamith wrote on:

        thanks you very much sir think about . and what is the correct method to reset the router . I push the reset button and hold it its all button light up same time and its off all button first one remain . and I switch off and on . I push several time reset button one by one on . but router now very slow . please help me

    Leave a Reply